Bosch Dishwasher Code H01: Troubleshooting and Solutions

In the busy world we live in today, owning a dishwasher has become essential, saving us precious time and energy. However, like all electronic appliances, they can sometimes encounter problems. For Bosch dishwasher owners, coming across the notorious H01 error code is a common problem. If you’re standing in front of your dishwasher, unsure of what to do next, don’t worry.

In this comprehensive guide, we’ll delve into the Bosch dishwasher code H01, unraveling its meaning, and providing you with effective troubleshooting tips to get your dishwasher back up and running. Check GE Dishwasher vs Bosch guide.

What is the Bosch Dishwasher Code H01?

Bosch Dishwasher Code H01 typically indicates a heating issue within your dishwasher. Specifically, it means that the dishwasher is unable to reach the desired water temperature during a wash cycle. This can lead to incomplete cleaning and sanitization of your dishes.

What components are involved in the heating system of a dishwasher?

The heating system of a dishwasher consists of several key components:

  • Heating Element: This component is responsible for heating the water in the dishwasher. It typically consists of a coil or heating rod that heats up when activated.
  • Temperature Sensor: The temperature sensor measures the water temperature and ensures it reaches the desired level. It helps regulate the heating element.
  • Thermostat: The thermostat is a safety device that monitors the water temperature. If it detects overheating, it can shut off the heating element to prevent damage.
  • Control Board: The control board manages the dishwasher’s functions, including activating the heating element at the appropriate times.

What is the purpose of the temperature sensor in a dishwasher?

The temperature sensor in a dishwasher serves a critical role in ensuring the effectiveness of the wash cycle. Its primary purpose is to measure the water temperature accurately. By doing so, it helps maintain the water at the optimal temperature required for effective cleaning and sanitization. If the sensor detects that the water is not reaching the desired temperature, it can trigger error codes like H01 to alert users to the issue.

What role does the water inlet valve play in dishwasher operation?

The water inlet valve is a crucial component in the operation of a dishwasher. Its main role is to control the flow of water into the dishwasher’s tub. Here’s how it works:

When you start a dishwasher cycle, the water inlet valve opens to allow a specific amount of water to enter the dishwasher.

This water is necessary for various stages of the wash cycle, including rinsing, cleaning, and providing the necessary water for the heating element to heat.Once the required amount of water is reached, the valve closes to prevent overfilling.

In summary, the water inlet valve ensures that the dishwasher has enough water to perform its cleaning and rinsing tasks while maintaining the correct water level throughout the cycle.

 Bosch dishwasher code H01

What are the Common Causes of the H01 Error?

To effectively resolve the H01 error, it’s essential to identify its root causes. Here are some common culprits:

1. Faulty Heating Element

The heating element is responsible for heating the water in your dishwasher. If it’s malfunctioning or damaged, it can trigger the H01 error.

2. Temperature Sensor Malfunction

A malfunctioning temperature sensor may incorrectly gauge the water temperature, causing the dishwasher to stop and display the H01 code.

3. Water Inlet Valve Issues

The water inlet valve regulates the flow of water into the dishwasher. If it’s defective, it can lead to insufficient water supply, preventing the dishwasher from reaching the required temperature.

How To Troubleshoot the Bosch Dishwasher Code H01?

Now that we’ve identified the potential causes let’s dive into troubleshooting the H01 error and getting your Bosch dishwasher back in action.

Step 1: Check the Heating Element

  1. Turn Off Power: Ensure the dishwasher is disconnected from power sources.
  2. Locate the Heating Element: Refer to your user manual to find the heating element’s location.
  3. Inspect for Damage: Visually inspect the heating element for any signs of damage, such as cracks or burn marks.
  4. Testing Continuity: Use a multimeter to check the continuity of the heating element. If it’s open circuit, it’s likely the culprit and needs replacement.

Step 2: Test the Temperature Sensor

  1. Power Off: Disconnect power from the dishwasher.
  2. Locate the Sensor: Find the temperature sensor in your dishwasher (usually near the heating element).
  3. Check Wiring: Ensure the sensor’s wiring is intact and securely connected.
  4. Testing Resistance: Use a multimeter to test the sensor’s resistance. If it’s out of specification, replace it.

Step 3: Examine the Water Inlet Valve

  1. Disconnect Power: Always start by disconnecting the dishwasher from the power source.
  2. Locate the Valve: The water inlet valve is usually at the bottom of the dishwasher.
  3. Inspect for Clogs: Check for any debris or clogs that may be obstructing the valve.
  4. Test for Continuity: Use a multimeter to check the valve’s continuity. If it’s faulty, consider replacing it.


In conclusion, the Bosch dishwasher code H01 can be a frustrating issue, but with the right troubleshooting steps, you can resolve it efficiently. Always prioritize safety and consult your user manual or a professional technician if you’re unsure about any step.

Now, you should be well-equipped to tackle the H01 error and enjoy the convenience of your Bosch dishwasher once again.

FAQs (Frequently Asked Questions)

How do I handle the Bosch dishwasher displaying the H01 error?

If your Bosch dishwasher shows the H01 error, begin by checking the heating element, temperature sensor, and water inlet valve for issues. Follow the troubleshooting steps provided in this article.

Can I repair the heating element myself?

While it’s possible to replace the heating element on your own, it’s advisable to seek assistance from a professional technician for safety and accuracy.

What can I do to prevent the H01 error from recurring?

Regular maintenance, including cleaning filters and ensuring a proper water supply, can help prevent the H01 error. Using the right detergent and loading dishes correctly can also contribute to error-free operation.

Is the H01 error covered under warranty?

Check your Bosch dishwasher’s warranty terms. If the appliance is still under warranty, contact Bosch customer service for assistance with the H01 error.

Are there any DIY fixes for the H01 error?

DIY fixes typically involve checking and potentially replacing components like the heating element, temperature sensor, or water inlet valve. However, exercise caution and consider professional help if needed, especially if you lack the necessary skills and tools.

Is the Bosch dishwasher code H01 a common error?

No, the H01 error in Bosch dishwashers is not as common as some other error codes.

Can the H01 error disrupt the dishwasher’s operation?

Yes, the H01 error can disrupt the normal operation of a Bosch dishwasher.

Is it safe to continue using the dishwasher when the H01 error appears?

No, it is not safe to continue using the dishwasher when the H01 error appears.

Does the H01 error relate to the dishwasher’s heating system?

Yes, the H01 error is directly related to the dishwasher’s heating system.

Can the H01 error be resolved without professional help?

Yes, the H01 error can potentially be resolved without professional help, depending on your expertise in appliance repair.

Share on:
Photo of author

By Steve

👋 Hey there! I'm Steve. 29 years old, a technician that came from an Electronic and IT background. I love problem-solving and enjoy tinkering with electronics