Don’t Panic! Here’s How to Fix the Samsung Dishwasher LE Code Error

Should you be the owner of a Samsung dishwasher, you may have encountered the LE code, indicating a leak. While this issue might be frustrating, there’s no cause for alarm. In our comprehensive guide, we’ll guide you step by step on how to identify and fix the LE code problem with your Samsung dishwasher, ensuring it returns to full functionality.

What does the code LE mean on a Samsung dishwasher?

The Samsung dishwasher LE code is caused by a leak in the dishwasher. This could be due to a variety of issues, including:

  • A clogged drain hose
  • A damaged door gasket
  • A malfunctioning water inlet valve
  • A faulty circulation pump
  • A faulty sensor or control board

Pre-Troubleshooting Steps

Before you begin troubleshooting the Samsung dishwasher LE code, there are a few things you should check:

  • Make sure your dishwasher is properly connected to power and water sources.
  • Verify that the dishwasher’s door is properly closed and latched.
  • Check the dishwasher’s user manual for any recommended troubleshooting steps.
Troubleshooting the Samsung Dishwasher LE Code

Troubleshooting Steps To Fix Samsung Dishwasher LE Code

The LE error code on a Samsung dishwasher indicates a leak error which is different from Samsung dishwasher lc code fix. Here are some steps to troubleshoot and fix the issue:

  1. Check the Drain Hose: The first thing to check is the dishwasher’s drain hose. Make sure it’s not clogged or kinked, and that it’s properly connected to the dishwasher and the drain.
  2. Inspect the Door Gasket: Check the dishwasher’s door gasket for any signs of damage or wear. If you find any issues, replace the gasket.
  3. Check the Water Inlet Valve: Inspect the dishwasher’s water inlet valve for any blockages or damage. If you find any issues, replace the valve.
  4. Test the Circulation Pump: Verify the dishwasher’s circulation pump is functioning properly. If it’s not, replace the pump.
  5. Check the Sensor and Control Board: Inspect the dishwasher’s sensor and control board for any issues. If you find any issues, replace the faulty component.
  6. Verify the Pressure Switch: If none of the above steps resolve the issue, check the dishwasher’s pressure switch. Replace it if necessary.

How do I reset the LE error on my Samsung dishwasher?

The Samsung dishwasher LE code reset ? indicates a leak error. To reset this error code, follow these steps:

  1. Turn off the power to the dishwasher by unplugging it from the electrical outlet or by turning off the circuit breaker that powers the dishwasher.
  2. Check the dishwasher for any visible leaks. If you find any, repair the leaks before proceeding.
  3. Wait for 5-10 minutes before turning the power back on.
  4. Turn the power back on and run a diagnostic cycle to see if the error code has been cleared. The process of running a diagnostic cycle may vary depending on the model of your Samsung dishwasher. Please refer to the user manual for instructions on running a diagnostic cycle.

If the error codes persists after following these steps check how to reset Samsung dishwasher guide post, or it may be necessary to contact a professional for assistance.

Additional Tips and Advice

Here are some additional tips to help prevent future occurrences of the Samsung dishwasher LE code:

  • Clean the dishwasher’s filter and spray arms regularly. Check our advanced how to clean Samsung dishwasher filter guide post.
  • Avoid overloading the dishwasher.
  • Only use detergents recommended for your dishwasher.
  • Run your dishwasher on a regular basis to prevent stagnant water.

If you’re unable to troubleshoot the issue on your own, contact Samsung’s customer service for further assistance.

Frequently Asked Questions

What does the LE code mean?

The LE code on a Samsung dishwasher indicates a leak error. It means that water has leaked into the base of the dishwasher and triggered a safety sensor.

Can I still use my dishwasher if it’s showing the LE code?

It’s not recommended to use the dishwasher if it’s showing the LE code. Continuing to use the dishwasher could cause further damage and increase the risk of electrical or safety issues.

How can I determine where the leak is coming from?

The first step is to remove the dishwasher’s front panel and inspect the base for water. Look for any visible signs of leaks, such as cracks in hoses or loose connections. Take a look into our guide post Samsung dishwasher leaking from bottom of door ,If you don’t see any obvious issues, you may need to call a professional for assistance.

How do I reset the dishwasher after fixing the leak?

After fixing the leak, you can reset the dishwasher by turning off the power for a few minutes and then turning it back on. Alternatively, some Samsung dishwashers have a reset button on the control panel that can be pressed to clear the error code.

How can I prevent the LE code from occurring in the future?

To prevent the LE code from occurring, make sure to maintain your dishwasher properly. Clean the filters regularly, use the recommended dishwasher detergent, and avoid overloading the dishwasher. Additionally, inspect the hoses and connections periodically for any signs of wear or damage.

What should I do if I can’t fix the leak on my own?

If you’re unable to fix the leak on your own, it’s recommended to contact a professional for assistance. Attempting to repair the dishwasher without proper training and tools can be dangerous and could cause further damage


The Samsung dishwasher LE code can be frustrating like the Samsung dishwasher error code 4c , but with this comprehensive guide, you should be able to troubleshoot the issue and get your dishwasher working again. Remember to always practice caution when troubleshooting any appliance issue and follow the recommended safety guidelines. Happy dishwashing!

Share on:
Photo of author

By Steve

👋 Hey there! I'm Steve. 29 years old, a technician that came from an Electronic and IT background. I love problem-solving and enjoy tinkering with electronics