Why my GE dishwasher control panel is Not Working?

When the control panel on your GE dishwasher ceases to work, life can get considerably more difficult. However, if the rest of your dishwasher appears to be in good shape, there’s no need to panic. We’re here to help. This guide is a part of the GE dishwasher troubleshooting collection, where we will delve into the possible causes for your control panel’s malfunctions.

The most inconvenient thing about a malfunctioning GE dishwasher control panel is not working that you cannot operate the dishwasher. Regardless, we’re here to assist you. We will explain the reasons behind your control panel’s malfunction and how to fix it in this post.

What Causes Dishwasher Control Panel To Stop Working?

There can be several reasons why GE dishwasher control panel not working. Some common causes include:

  1. Electrical problems: A dishwasher’s control panel may stop working if there is a problem with the electrical supply to the dishwasher. This could be due to a tripped circuit breaker, a faulty outlet, or a problem with the dishwasher’s wiring.
  2. Moisture damage: The control panel on a dishwasher is prone to moisture damage, especially if the dishwasher has been leaking or there has been a lot of steam in the dishwasher during use.
  3. Control panel malfunction: The control panel on a dishwasher may stop working if there is a problem with the panel itself, such as a faulty button or a malfunctioning display.
  4. Power surge: A sudden power surge or spike in the electrical supply to the dishwasher can cause the control panel to stop working.

If your GE dishwasher control panel not working, you may need to troubleshoot the problem to determine the cause. In some cases, you may be able to fix the problem yourself, but in other cases you may need to call a professional for assistance.

The GE dishwasher control panel is not working

You might be experiencing issues with your GE dishwasher control panel or the part of it that controls those functions. To help you save time and money, we explain how to fix the problem yourself.

Reset to clear all options

Resetting during a Cycle

You can reset the control panel if it malfunctions in the middle of a cycle. Simply press the Start/Reset button twice to work on this.

Resetting it restores all of the original settings and might bring the control panel back.

You may require to press the button only once on some models. You should consult your device manual to determine what is appropriate for your device.

Rebooting the Dishwasher is an option

Rebooting a GE dishwasher is a straightforward process. You can disconnect it from the circuit breaker of your house or power source for a few minutes to reboot it.

The control panel might be working again when you reboot the machine.

Make sure to take the proper electrical precautions at this stage to avoid any accidents.

There is a problem with the GE dishwasher’s touchpad

Ge dishwasher buttons not working? When the display lights up, but the buttons do not work, the dishwasher is likely at fault. You may check for problems by seeing if some buttons respond to your touches or not.

Try reinstalling and removing the dishwasher again to see if that fixes the issue. Also, make sure that the dishwasher door is shut.

Your dishwasher’s touchpad might be defective or your control board might be defective.

The GE Dishwasher’s control panel is locked

The GE dishwasher includes an extra safety feature that locks the control panel. For example, the child lock function prevents the child from activating the dishwasher accidentally.

Your GE dishwasher control panel might be dysfunctional because the child lock safety feature has been activated.

To turn the child lock on or off, press the button once. You can also do this by pressing the button down for three seconds. Read more about GE Dishwasher Lock Controls features.

How To Fix GE Dishwasher Control Panel Not Working

Follow these steps to troubleshoot GE dishwasher control panel not working:

Clean the control panel’s ribbon cables

GE dishwasher control panel is Not Working

Just use a pencil eraser to clean the ribbon cables attached to the control panel. Dirt buildup can accumulate on the ribbon cables when they are uncleaned for a long time.

Make sure to unplug the dishwasher from the power source before cleaning the ribbon cables.

You can clean the eraser on your pencil by rubbing it against your clothes. Be sure to pay attention to all the screws as you remove them.

You should ask for professional help when cleaning the ribbon cables. Beyond that, extra care is required.

To remove the main feed from the control board, plug and unplug it

The control board relies on the central power supply to wash and dry dishes; this is how it performs its important functions.

Check if the original power source to the control board can function properly with the control panel. Return the board to its original state and see if that works.

Always remember to take all the electrical precautions while working with this to avoid all electrical hazards.

Replace the control board

To order a replacement for a faulty control board, please confirm that the dishwasher is not connected to power first.

You must separate the inner and outer door panels to access the board.

When removing a screw, be sure to notice where it goes. Once the faulty control board has been removed, you can replace it with a new one. If any wires are connected to it, remove them first.

Make sure to put wires and screws back where they belong. Then power on the dishwasher and see if it performs the miracle you seek.

Replace the control panel

If you want to fix your dishwasher, you will have to spend a lot of time and energy wiring up the right connections. It is best to contact a professional instead.

Make sure to disconnect the power and water supplies before proceeding on your own.

To access the control panel, remove the door panels. Disconnect the control panel and other connections.

Fix the issues in the new control panel and reattach all wirings. Turn on the power and water supply again.

How much does it cost to replace a control board on a dishwasher?

The dishwasher control panel might cost $150 to repair. On the other hand, replacing the dishwasher would cost at least $500.

Sometimes, having a professional look at DIY guides can be a lifesaver. Usually, warranty repairs are free of charge if your dishwasher is covered by warranty.

If a new dishwasher is half the cost of a repair, order a new one. Even so, consult an experienced technician to determine the cost of the repair.

How do I reset my GE dishwasher control board?

How to reset GE dishwasher control panel?To reset the control board on your GE dishwasher, follow these steps:

  1. Make sure the dishwasher is turned off and unplugged from the electrical outlet.
  2. Locate the control board. It is typically located behind the dishwasher’s control panel or under the dishwasher.
  3. Find the reset button on the control board. It may be a small, red button, or it may be labeled “reset.”
  4. Press and hold the reset button for 10-15 seconds, or until you hear a clicking sound.
  5. Plug the dishwasher back in and turn it on.

If this does not reset the control board, you may need to check the wiring and connections to the control board to make sure everything is secure check no power to ge dishwasher. If the problem persists, you may need to call a professional for further assistance.

Frequently Asked Questions

Why won’t my dishwasher buttons work?

There are a few potential causes of dishwasher buttons not working. One possibility is that the dishwasher’s power cord is not fully plugged in. If the dishwasher isn’t getting electrical power, the buttons may not work. Another possibility is that the dishwasher’s buttons are malfunctioning. If the buttons aren’t responding as they should, it may be time to replace them, you can also check ge dishwasher no power troubleshooting post.

How do I reset my dishwasher control panel?

There are a few ways to reset the control panel on a GE dishwasher. If the machine is not running, you can reset the control panel by pressing and holding the power button for 10 seconds. If the machine is running but the control panel is not responding, you can reset the control panel by unplugging the power cord for 5 minutes and then plugging it back in. If the machine is not running and the control panel is not responding, you can reset the control panel by pressing and holding the reset button for 10 seconds.

How do I fix my GE dishwasher control board?

The dishwasher control board is a small, black box that resides on the top of the dishwasher. It contains a number of electronics that control the various aspects of the dishwasher. If this board becomes damaged or defective, it can cause various problems with the dishwasher. In most cases, it is possible to fix the board by replacing it.

How do I know if my dishwasher control panel is bad?

There are a few things you can do to check if your dishwasher control panel is bad. First, try to reset the dishwasher by unplugging it and then plugging it back in. If the dishwasher still doesn’t work, you can try to contact your dishwasher manufacturer to see if they have any troubleshooting tips.


You might have issues with your GE dishwasher control panel not working due to the factors outlined above. Make certain to inspect the listed problems and apply the suggested solutions carefully. If you require further assistance, please contact a qualified technician.

Share on:
Photo of author

By Steve

👋 Hey there! I'm Steve. 29 years old, a technician that came from an Electronic and IT background. I love problem-solving and enjoy tinkering with electronics

3 thoughts on “Why my GE dishwasher control panel is Not Working?”

Comments are closed.