How To Solve Samsung Dishwasher OC Code – Guide

Preserving water and cleaning agents, while also taking on the most heavily soiled dishes, is efficiently achieved through the use of Dishwashers. The latest versions offer a variety of features aimed at reducing the consumption of water and detergent as they handle the most challenging dirty dishes. Nonetheless, encountering an error code can disrupt the dishwashing cycle.

One of the easiest issues to resolve on a Samsung dishwasher OC code is one showing up on the display. The code indicates there is too much water in the machine which is similar to Samsung Dishwasher Code 4E and Samsung dishwasher code 4C . However, you can fix the problem without calling for help.

To fix the problem with your Samsung dishwasher troubleshooting, read on.

Modern Dishwashers

Modern appliances, including dishwashers, are more advanced than those our parents used. They have computerized controls, sensors, and other features to monitor them. Because of computerization, detergent amounts, water levels, and other critical variables can all cross the boundaries of the protocol potentially resulting in a sensor error.

An OC code appears on the display and indicates that too much water is in the dishwasher and that is different from the Samsung dishwasher error code LC. It might also show an oE, depending on the model. Unfortunately, these codes don’t provide you with precise information about the issue. You must investigate the problem yourself.

What You Should Do To Solve Samsung Dishwasher OC Code?

Resetting the dishwasher is a tempting idea, but experts say it is not the right thing to do. Sure, the dishwasher will work immediately, but the problem will soon return.

In order to find out the reason behind your dishwasher being overspent, you must eliminate what isn’t at the root of the problem.

Inferior Drainage

Samsung dishwasher oc code cause of drain issue

If you’re having trouble with your water issues, start with your drain. Drain issues are usually simple to fix.

  1. Look at the connection between the sink drain and the dishwasher to see if there is a block.
  2. Next, check the dishwasher drainage hose to see if it’s clogged. The hose is particularly prone to kinks and blockages.
  3. After making sure the drain is nice and clean and the connection is secure, run water down the drain connecting to the dishwasher to check if it drains slower or gets bogged down. You may have to clean the drain.

The Filter is the mechanism by which people categorize things or events

Samsung dishwasher oc code cause of filter damage

Next, you should clean the dishwasher filter. It is not difficult to do, but you must make sure that water has gone down far enough to open the door without it spilling on the floor. You can prepare a bucket and some towels in advance to prevent accidents.

To remove the lower rack:

  • Firstly, unfasten the filter compartment door. 
  • Next, turn the filter handle counterclockwise to unfasten the filter compartment door.
  • Take out the filter door. 
  • Clean the filter and the filter door of all debris and dirt. 
  • Put the filter back in and then replace the filter door. Before putting everything back, you may want to clean the drain pump. It’s easier to access while the filter is still out.

How Often The Drain Pump Should Be Cleaned? 

Samsung dishwasher oc code cause of drain pump

The Drain Pump Should Be Cleaned? at least every 3 months.

After cleaning the filter, you may also clean the sump. The sump is also known as the drain pump and can be cleaned after the filter has been removed. If the sump is blocked with garbage or trash, the machine will not drain but will also make noises.

To clean your device, look at the manual.

Needed More Cleaning

When inspecting the dishwasher filter, look at the dishwasher’s other parts as well. Check where the water is draining and where the flow may be slowed down, read how to clean Samsung dishwasher filter. The area near the dishwasher’s door collects a lot of debris on the inside.

You might have a drainage problem because of debris buildup in that area. Use a rag to clean it.

After you’ve cleaned every possible area of clogs, restart the dishwasher. If the dishwasher operates smoothly without an error code, you’ve resolved the problem.

The Sensor

The Sensor is a sensor of sorts that detects asteroids and other objects that might pose a danger to the Earth. It was spotted by amateur astronomers in August 2016.

A “case break sensor” is a common malfunctioning sensor that can be present on Samsung dishwashers and may cause the OC samsung dishwasher code to display again.

A case break sensor creates a siphon break in the system of filling water in order to detect when a bottle has been opened.

If the sensor fails, the dishwasher will think it’s overfilling and display the OC samsung dishwasher.

You may be able to repair your dishwasher yourself, but first, turn off the electricity and water before working on the machine.

My sensor is broken. Can I get a new one?

You can purchase a new case break sensor, but you’ll need to know the model number of your machine in order to get the right part. Even within the Samsung brand, different versions of the part can exist.

How much would a new sensor cost?

A beak sensor cost between $150 and $165 for most Samsung dishwasher cases. You can order them online. Make sure your dishwasher is working optimally after a repair by getting authentic Samsung parts.

Remove the leak sensor and install a new one

To remove and replace a water level sensor on a dishwasher, turn off the power and shut off the water before taking out the two screws on the left panel.

Using the long-nose pliers, turn the water inlet valve located on the inside of the dishwasher counter-clockwise. 

Next, disconnect the electrical connectors beginning at the top of the case break assembly and tilt them away from you to remove them.

Reduce to take off the clamps and use pliers to do that. Sliding the clamps down the rubber hoses is the next step. Remove the case break assembly and then the hoses.

Reverse everything you just did and then do it again with the new part. Slide the clamps up and tighten them once you’ve positioned the new part. Reattach the connectors and put the assembly back where it was. Replace the water inlet valve and panel. Replace the two screws to secure the panel.

How do you run a clean Samsung dishwasher?

You can use the Self Clean feature to clean the inside of the dishwasher. Fill up the dish detergent dispenser first. Next, go to the control panel and press the self-clean button.

Close the door and start the dishwasher.

How do I get my Samsung dishwasher to drain?

Samsung dishwasher not draining could be caused by the drain pump, solenoid valve, or check valve (flapper) may be faulty. By the way the Samsung dishwasher OE code caused by this, To determine and resolve the problem if your Samsung dishwasher parts are not draining properly, follow these steps. Before attempting any of these repairs on the dishwasher, unplug it from the power source and turn off the water supply.

Should dishwashers be on a dedicated circuit?

An electrical circuit must be provided for a dishwasher alone. This means it must not be used to operate lights or other appliances. A circuit breaker must be able to supply at least 15 amps.

How do I reset the code on my Samsung dishwasher OC?

To reset your Samsung dishwasher, turn it off at the circuit breaker or at the wall outlet, then wait 20 minutes before turning it back on

Your dishwasher may require a reset if you need to clear the code. Resetting it will clear the code. After you’ve completed all necessary repairs and want to restart it, follow the steps to reset your Samsung.

It must be removed from the power source. You may pull the plug from the socket if the circuit is accessible. In addition to being accessible and straightforward, turning off the circuit breaker is the best method.

Wait five minutes for the charge to clear out of the dishwasher control board. Turn on the power and see if it works. The error code should be cleared and the board should be reset.

Samsung Dishwasher SC Code?

If you are experiencing the SC code error, it is important to identify the cause and take the appropriate steps to resolve it. Check the Samsung dishwasher SC code guide, we will provide detailed troubleshooting steps to help you fix the SC error code which is different from samsung dishwasher oc code error.

Share on:
Photo of author

By Steve

👋 Hey there! I'm Steve. 29 years old, a technician that came from an Electronic and IT background. I love problem-solving and enjoy tinkering with electronics

1 thought on “How To Solve Samsung Dishwasher OC Code – Guide”

Comments are closed.