Samsung Dishwasher Troubleshooting For 6 Problems

Six main Samsung Dishwasher problems exist, each causing different types of headaches.

What are the 6 most common Samsung dishwasher problems and how can you fix them? To learn about Samsung dishwasher troubleshooting and how to fix them, keep reading.

Samsung dishwashers have certain issues. It is crucial to be able to identify and fix the problem so your dishwasher will clean your dishes properly again.

Here is a list of the most common Samsung dishwasher problems and solutions. In what order did the foods in this dish go?

Samsung Dishwasher Troubleshooting 

The following are the 6 most frequently encountered Samsung dishwasher problems:

#1 Samsung dishwashers aren’t cleaning dishes

The dishes being washed by Samsung dishwashers are often not properly cleaned, particularly those situated on the upper rail.

Check the spray arms first. Occasionally, food and drink may fall into the little spray holes and divert the water downwards, thereby decreasing its force.

Before loading your dishes in the washer, rinse them off to prevent debris from collecting.

You should also look at the filter assembly once you have checked the spray hose.

If food debris and waste get caught under the filter assembly, the dishwasher will not clean as well as usual.

The reason why this happens is that the food blocks the water pressure required for cleaning the dishes from being created by the dishwasher.

Use a screwdriver to pry off the water tubes. Remove the screws that are holding the filter assembly in place. Then remove the lower spray head. The water tubes can be removed using a screwdriver.

Once the screws are all out, lift the assembly up and out.

To remove the impeller, unscrew the connecting screw and then remove it. Do not reverse the direction of the screw.

After removing the impeller, pick up any debris you see, using your hand or turkey baster.

Reassemble the dishwasher after cleaning it out.

#2 Samsung Dishwasher Not Draining

9 Things Why Samsung Dishwasher Not Draining

Dishwashers made by Samsung are prone to flooding. Samsung dishwasher not draining is one of the most frequent problems.

If your dishwasher doesn’t clean properly, it is most likely due to food buildup and non-rinsed-off grease and debris. Other parts related to the dishwasher’s draining can also experience normal wear and tear.

There are six fundamental reasons why your dishwasher may not be working properly. Dishwashers can stop draining properly for a number of reasons, including the drain hose, check valve, drain filter, drain pump, drain solenoid, and water inlet assembly.

#3 The computer’s power or touchpad isn’t responding


Many Samsung dishwasher owners report that the dishwasher lacks power or the touchpad is unresponsive.

The control board or touchpad interface board may be damaged or malfunctioning and cause this problem.

To get the Control Board, click here

If unplugging the unit helps with the problem, continue to do so until the problem reoccurs.

Resetting the circuit breaker of your home is advised by Samsung.

This is a good first step to make sure that there isn’t a tripped breaker.

Many faulty models are not caused by a tripped breaker.

People have noticed that the control panel is not at fault for this blunder and that it has nothing to do with the user.

The Samsung dishwashers fail to start or the touchpad on the control panel doesn’t respond more frequently than other models.

You must replace the control panel if it is at fault for this problem.

Before using or maintaining the dishwasher, unplug it.

Carefully unscrew the door mounting screws from the door panel and then separate the inner panel from the outer panel. Do not remove all of the mounting screws.

Disconnect the panel from the wiring and notice the direction of the wiring.

Position the new panel in the specified location, and then reconnect the wiring to the proper terminals. Wire holders and reassemble the door.

#4 Samsung dishwasher Won’t Start

samsung dishwasher wont start

The most frequent issue with the Samsung dishwasher won’t start.

The following are the two most frequent reasons why a dishwasher won’t operate:

PE error code: If your dishwasher displays this code, there is a problem with the power control board. You will need to replace it. The power control board can be accessed from the lower panels. After removing the housing, disconnecting the wires, and replacing the component, you must reassemble the appliance.

If your dishwasher does not start and there are no problems displaying, it is possible that the switch door latch needs to be replaced. To begin, you must remove the inner door panel from the outer door panel. After separating the panels, you will be able to pull out the old latch. The next step is to install the new latch onto the mounting screws. After connecting the wires, the dishwasher should work again.

#5 Samsung Dishwasher Not Drying Dishes

Unfortunately, Samsung dishwashers don’t properly dry the dishes.

The heating circuit and the vent case assembly are part of the dish-drying system.

The vent case assembly is what causes the Samsung dishwasher to improperly dry the dishes for many users.

The vent case assembly releases the pressure from the dishwasher’s vent. A fan is included.

The dishwasher retains steam if this assembly is not functioning properly, resulting in your dishes appearing damp even after the dry cycle.

To remove the upper and lower racks of the dishwasher, first, remove the screws holding the inner and outer panels together.

Remove the front panel. Remove the console panel and set the latch assembly to the side. Remove the console wiring.

Disconnect the vent case assembly wiring and remove the tape.

To remove the vent assembly cover and free the vent tube, twist the lid counterclockwise from the front.

Now, install a new vent assembly through the front of the door. Reassemble the dishwasher.

#6 Samsung Dishwasher Auto and Heavy Blinking

Samsung Dishwasher Auto and Heavy Blinking

When you see a Samsung dishwasher auto and heavy blinking or lights NORMAL—HEAVY—SMART AUTO flashing that means If a component on the Samsung dishwasher is not functioning properly, you will be notified.
Errors on the Samsung dishwasher are not difficult to fix; slight adjustments to water temperature or drain hose installation should do the job.
Make sure to turn off the water before digging into what might be wrong with your Samsung dishwasher. Testing the voltage of the power outlet is also a great idea. Additionally, turn off the power supply.

Frequently Asked Questions

How do you remove Samsung dishwasher LC code flashing?


The flashing LC on your Samsung dishwasher indicates that the leak sensor on the dishwasher has detected water leakage or moisture. When the error code LC appears, turn off the dishwasher for 15 minutes to clear it. This should reset the dishwasher and clear the error code. Check Samsung dishwasher LC code article.

How To Reset Samsung Dishwasher?

how to reset samsung dishwasher

If you are experiencing dishwasher issues, whether an error code that won’t go away or problems with the washing cycle itself, a reset may be the answer to your troubles. Take a look at how to reset Samsung Dishwasher instructions, If you notice trouble with your appliance and want to fix it without calling a technician.

How To Clean Samsung Dishwasher Filter?

how to clean samsung dishwasher filter

Here is how to clean Samsung dishwasher filter in simple steps:
After removing the Samsung dishwasher filter, rinse it, and then roll out the coarse filter from its location in the dishwasher. If there is anything left on the filter after this step, remove and discard it.
Next, run hot or steamy water through the filter after switching on the faucet to wash any small particles that might be left. Add dish soap to the water and create a lather in order to clean the filter compartments

How To Reset Samsung Dishwasher OC Code?

How To Solve Samsung Dishwasher OC Code

The dishwasher’s control panel is where it’s done, but it also lets you know if anything’s wrong. An error code, which you can locate using your user manual, might appear if the dishwasher is able to identify an issue. There is also a Samsung dishwasher OC code error.
To get rid of the error code LC/LE displayed by a Samsung dishwasher when a leak is detected, you must perform a manual reset. This code indicates that a leak is present in your dishwasher, so check to make sure there are no leaks before resetting it and getting rid of the error code.

What buttons do you press to reset a Samsung dishwasher?

There are several buttons that you can press to reset a Samsung dishwasher. Some of these buttons may be labeled “reset” or “recycle.” To reset a Samsung dishwasher, you may need to press and hold the power button for about two seconds, then release it. You may also need to press and hold the “rinse” and “clean” buttons for about two seconds, then release them.

What does a blinking light on a Samsung dishwasher mean?

The blinking light on a Samsung dishwasher means that there is something blocking the water from reaching the dishwasher. This can be something as simple as a piece of fluff caught in the dishwasher’s impeller, or it could be something more serious, like a clogged drain. If the blinking light is constant, it may be time to call a technician to check out the dishwasher.

Why will my Samsung dishwasher not start?

There are a few things that could cause your Samsung dishwasher not to start. The most common issue is a bad power cord. If the power cord is not plugged in properly, the dishwasher will not turn on. Another common issue is a clogged dishwasher drain. If the dishwasher is not draining properly, water can build up and cause the dishwasher to not start. Finally, there may be something blocking the dishwasher drain. If this is the case, you will need to take the dishwasher apart to clean it.

Where is the reset button on a dishwasher?

There is no reset button on the dishwasher.

How do you reset a dishwasher that won’t start?

There are a few different ways to reset a dishwasher that won’t start. One is to remove the power cord and plug it back in. Another is to remove the water supply valve and wait five minutes before reconnecting the valve. If neither of these methods works, you may need to call a professional.

What would cause my dishwasher to stop working?

There are a few potential causes for your dishwasher not working, but the most common is a broken belt. If the belt is broken, it can cause the dishwasher to stop spraying water and fill up with dirty water. To fix this, you’ll need to replace the belt. If the dishwasher is not spraying water or filling up with dirty water, there may be something blocking the water flow. In this case, you’ll need to take the dishwasher apart and clean out any blockages.

Choosing the Best Detergent for Samsung Dishwasher

Best Detergent for Samsung Dishwasher

Looking for the best detergent for Samsung dishwasher?This guide covers important factors to consider,such as compatibility,water type and environmental impact.


Appliancehelphub hopes that this article has made the process of identifying and fixing your Samsung dishwasher easier and less stressful. Always be safe when fixing any appliance, including your dishwasher, by unplugging it from the power outlet and disconnecting the water source before maintenance.

Share on:
Photo of author

By Steve

👋 Hey there! I'm Steve. 29 years old, a technician that came from an Electronic and IT background. I love problem-solving and enjoy tinkering with electronics